The use of automated instrument washer-disinfectors is growing worldwide as regulatory authorities and body artists endorse and adopt what has come to be understood as the most effective and consistent means of disinfecting instruments prior to terminal sterilization.
HYDRIM C61wd G4 Instrument Washer
Featuring a stainless steel exterior, the HYDRIM C61wd G4 is equipped with the latest technology and the same connectivity attributes as the STATIM G4.
The HYDRIM C61wd has a 6-full sized cassette capacity – the biggest of its kind. This means that the office can turnover 120 instruments in 35 minutes, start to dry.
The tabletop footprint allows for under counter or counter top installation, so that offices have flexibility in maximizing their workspace in the reprocessing area. In addition, the time saved by automated washing compared to ultrasonic cleaning is approximately 1 hour of labour for every nine procedural set-ups. The increased efficiency translates to the HYDRIM C61wd G4 paying for itself in about 38 months.
Boasting the G4 technology, the HYDRIM C61wd G4 is capable of emailing anyone the office chooses, including Technical Service personnel. It also allows remote access for easy troubleshooting. The automatic user interface software upgrades ensures the user will always have access to the most recent version and features, such as instructional slideshows of routine maintenance procedures, updated screensaver images, and more.
Designed from the ground-up by SciCan engineers, the HYDRIM C61wd G4 encompasses over 10 years of experience in instrument washers. The modular design of the covers makes it easier to access specific components. The single screw type means it’s only one type of screwdriver that is needed to remove the panels. Handles and bumpers facilitate turning the unit on its back to access all the critical components, located underneath the unit. The HYDRIM C61wd G4 was designed with the technician in mind.
Please take a moment to view our videos on SciCanTV:
Included with the purchase of a unit:
NOTE: One pouch of HIP Ultra is included with the purchase of a unit, cases of it must be ordered separately.
Available are the following:
Pre-Installation Document (SD-414): This is imperative that sales/technicians run through this list with the office before the purchase of a unit to ensure that all the spacing, plumbing and electrical requirements are met.
Installation Instructions (95-113166): A copy of this document is included with each unit. Please adhere to these instructions to ensure seamless operation of the unit.
This is a very exciting time for the body art industry, as the integration of the G4 technology in the HYDRIM and STATIM in a pioneering technology that makes it easier for body art studios to focus on their business, and not on administrative tasks.
HYDRIM C61WD G4 ensures instruments are properly and consistently cleaned and disinfected before moving to the next step of instrument reprocessing, sterilization.
*Actual cycle times will vary with incoming water temperature and pressure.† Please note that this cycle DOES NOT provide disinfection. This option can only be activated by a technician.
HYDRIM Washer-Disinfectors EN FR ES IT
HYDRIM C61WD G4 Operator Manual EN CS DA ES FR IT NL PL PT RO RU SV UK EL
HYDRIM C61WD G4 LUMENS CLEANING SYSTEM (LCS)
HYDRIM C61WD G4 QRG EN
Water Softening Salt EN
Infection control products and practices
Sterilization and equipment maintenance-STATIM autoclave work practices-HYDRIM automatic instrument washer work practices
Jewelry safety standards -Quality materials and design-Finishing and customizing jewelry--Anodizing, passivating and coloring titanium and niobium-Appropriate form, size and placement for new piercings
Precision modern body piercing techniques-Safe piercing procedure without clamps [freehand]-Large gauge initial piercing methods-Science and experience based aftercare
Brian W Skellie
Owner & Piercer
Brian founded Piercing Experience in 1992 as a piercer inspired to research and evolve safe body modification and share the results with the community. He is a frequent Association of Professional Piercers contributor ever since the first conference, an active business member since 1996, an educator who has presented many seminars and workshops at conferences all over the world. Former Editor of The Point Journal, former Chair of the Media Committee, International Liaison, Medical Liaison and President, now serving as CIO and Vice President in his fifth term on the board of directors.
Brian celebrates over 30 years of sharing his body art expertise with his clients, colleagues and friends. He specializes in body piercing, safety standards, STATIM autoclaves and HYDRIM automated instrument washers, and is an authorized dealer for the SciCan family of products. He offers expert consultation and training for streamlined workflow for Body Art Professionals. As a long time member of ASTM International and the APP, he develops, interprets and publishes evidence based standards for continual improvement in the field of Body Arts.